• Aerosol can of Magnaflux WCP-2 White Contrast Paint
  • Twelve aerosol cans of Magnaflux WCP-2 White Contrast Paint
1 3

Magnaflux

Magnaflux WCP-2 Contrast Paint

Magnaflux WCP-2 Contrast Paint

SKU: 01-2250-78

Stock Status: In stock
$362.00
$362.00
Sale Sold out
Packaging
View full details

Magnaflux WCP-2 Contrast Paint

A bright white, opaque NDT contrast paint, WCP-2 provides a high contrast background to improve probability of detection and sensitivity during visible magnetic particle inspections.

This fast drying paint aerosol sprays on evenly, without flaking, before inspection so when nonfluorescent / colored magnetic particles are applied, the indications appear clearly against the opaque white background.

Magnaflux WCP-2 can be used with all types of colored and visible mag particles, including 7HF and 7C Black wet method particles, or #2 Yellow and #8A Red dry method magnetic powders.

Benefits

Maximize Indication Detection

  • See indications more easily on WCP-2’s bright white, opaque surface which highlights indications while minimizing glare/reflections

Increase Inspection Speed

  • Reduce downtime and evenly apply product due to newly upgraded 360° sprayer
  • Accelerate inspections with a clean, bubble-free coat applied on the first pass.
  • Dries quickly and evenly, creating an optimal surface for rapid indication formation.

Application Versatility

  • The convenient aerosol format allows for easy transport and application in various settings.
  • Compatible with both wet and dry magnetic particle methods on nearly any part.
  • Meets ISO 9934 specifications for reliable performance.

Features

  • Bright white color for high contrast
  • High opacity for effective background contrast
  • Fast-drying formula for quick application
  • Controlled application for precision use
  • Strong surface adhesion and matte finish
  • Very low toxicity for safer handling

    Ideal for:

    • Field testing
    • Spot inspections
    • In-service inspections

    Use Recommendations

    NDT Method:

    Magnetic Particle Testing, Nonfluorescent / Visible

    ISO 9934

    INSTRUCTIONS FOR USE

    Use 7HF, 7C Black, #2 Yellow or #8A Red and with appropriate magnetization procedure and equipment. For best results, all components, parts, or areas to be tested should be clean and dry prior to testing to provide an optimal test surface and reduce particle suspension contamination.

    Use with WCP-2 to improve contrast and inspection sensitivity.

    1. Shake the can well before use and occasionally during application to ensure suspension uniformity and concentration.

    2. Apply the minimum amount of WCP-2 needed to hide the color of the underlying metal. Several light passes are better than one heavy one.

    3. Hold the can 7 to 9 inches (18 to 24 cm) from the area to be tested.

    4. Allow the film of WCP-2 to dry completely before applying magnetic particles, film typically dries in 60 seconds under ambient conditions.

    REMOVAL

    Remove WCP-2 with acetone for best results. All components, parts, or inspection areas must be properly demagnetized before cleaning to ensure easy particle removal. Cleaned parts may be treated with a temporary film protective coating if longer corrosion protection is required.

    Product Data Sheet Safety Data Sheet 360° Sprayer Flyer