• Magnaflux UVM3059 UV Light Meter
  • Magnaflux UVM3059 UV Light Meter in a protective case
1 4

Magnaflux

Magnaflux UVM3059 Digital UV Light Meter - Certified

Magnaflux UVM3059 Digital UV Light Meter - Certified

SKU: 133200

Stock Status: In stock
$1,870.00
$1,870.00
Sale Sold out
View full details

The UVM3059 is designed for measuring ultraviolet radiation, primarily for use in non-destructive material testing. It was developed according to the specifications of ISO 3059.

The housing is dust and splash-proof according to protection class IP54. The optical sensor is integrated into the surface of the meter.

PRODUCT PROPERTIES

Display backlit digital graphic display, 160 x 64 px
Power supply 9V block battery (PP3, 6LR61)
Current consumption max. 16mA
Battery life approx. 50 hours measuring time (at medium display brightness)
Automatic switch-off after 5 minutes
Measuring range 0.5 - 100 W/m², 50 - 10,000 µW/cm², 0.05 - 10 mW/cm² (each range individually selectable)
Light sensitivity UV-A radiation with 365 nm wavelength (see chart )
Languages Operator’s menu available in English, German, and French
Dimensions 120 x 65 x 22 mm (in its plastic housing)

SPECIFICATION COMPLIANCE

  • ISO 3059
  • ASTM E2297
  • ASTM E1444
  • NADCAP AC7114/1
  • NADCAP AC7114/2

INSTRUCTIONS FOR USE

Switch on the device by pressing the central button underneath the display screen; the device is immediately ready to measure.

Switch off the device by pressing the button again. If the device is not switched off, an Auto- Power-Off is performed after 5 minutes.

Hold/place the device flat in the illuminated area. The measured value is shown on the display.

If necessary, adjust the contrast and brightness of the display using the two buttons located under the battery compartment cover.

To replace the battery, you must unscrew the battery compartment. (due to protection class IP54).

Product Data Sheet