• A single aerosol container of Magnaflux SKC-S Penetrant Inspection Cleaner / Remover
1 1

Magnaflux

Magnaflux Spotcheck SKC-S Cleaner/Remover

Magnaflux Spotcheck SKC-S Cleaner/Remover

SKU: 01-5750-77

Stock Status: In stock
$23.95
$23.95
Sale Sold out
Packaging
View full details

Magnaflux Spotcheck SKC-S Cleaner/Remover

SKC-S is an NDT-approved solvent cleaner/remover designed for pre-cleaning prior to non-destructive testing and for effectively removing excess surface penetrant from inspection areas before applying developer during liquid penetrant testing. This versatile, non-halogenated solvent is suitable for a wide range of substrates, efficiently eliminating oils, greases, and other contaminants. It dries quickly without leaving a residue, adhering to the stringent low-residue requirements for NDT and aerospace penetrant testing.

Benefits

Maximize Range of Inspections

  • Inspect a wide variety of components with confidence.
  • Meets AMS 2644 Class 2, ASME BPVC, and all major aerospace standards.

Application Versatility

  • Utilize a single cleaner throughout the entire penetrant testing process.
  • Available in bulk and aerosol forms, or as part of a convenient kit.

Minimize Risk of Missing a Flaw

  • Ensure reliable inspections by cleaning only the surface without flushing penetrant out of discontinuities.
  • Dries rapidly without leaving residue, preventing false indications.

Features

  • AMS 2644 Class 2 non-halogenated remover.
  • Fast drying properties.
  • Leaves no residue behind.
  • Suitable for low-temperature applications.
  • Compatible with various alloys.
  • Available in both bulk and aerosol forms.
  • Prevents over-cleaning.

Ideal for:

Pre-cleaning for non-destructive testing.

Removing excess surface penetrant.

Post-inspection cleaning.

Specifications

AECL

AMS 2644

ASME BPVC

ASTM E1417

ASTM E165

Boeing BAC 5423 PSD 6-46 or 8-4

Boeing PS-21202

General Electric P50YP107

ISO 3452-2

MIL-STD-2132

MIL-STD-271

NAVSEA 250-1500-1

INSTRUCTIONS FOR USE

For NDT pre-cleaning:

1. Spray the surfaces to be cleaned liberally with the cleaner then either wipe off or allow to air dry, or soak a clean cloth with the cleaner and wipe the part clean.

2. Allow the part to dry thoroughly before applying the penetrant.

To remove excess surface penetrant:

1. Apply SKC-S to a cloth, wipe test surface and repeat as needed.

2. Do not spray SKC-S directly on the part because penetrant indications may be removed.

Safety Data Sheet Product Data Sheet