Magnaflux 14A Redi-Bath Fluorescent Particles - 1 Gallon

Magnaflux 14A Redi-Bath Fluorescent Particles - 1 Gallon

Item# 01-9130-20
$250.00

Water-Based Fluorescent Magnetic Particle Concentrate

14A Redi-Bath is a highly sensitive water-based magnetic particle suspension for locating very fine discontinuities in critical parts. A concentrated mixture of 14A with water conditioning agents, defoamers, and corrosion inhibitors. 14A Redi-Bath is intended for use in wet method magnetic particle inspection.

14A Redi-Bath is diluted with water for use then sprayed onto a magnetized part prior to inspection. It is used to detect cracks and seams, as well as inclusions, laps, tears and flakes. 14A Redi-bath can detect flaws that are open to the surface of the part, or slightly sub-surface. Parts tested can be forgings, welds, castings, and stamped or machined ferromagnetic materials, such as steel and other alloys of iron, nickel, and cobalt. Using 14A Redi-Bath may eliminate the need for an additional corrosion inhibitor step. The fluorescent particles in 14A collect where the magnetic field is interrupted, and glow under ultraviolet (UV) lighting.

Benefits

  • Clear, bright indications under ultra-violet light
  • High sensitivity
  • Easy post-testing clean up
  • Excellent fluorescent contrast for quick identification
  • Excellent particle mobility
  • Good dispersion stability
  • Great concentration consistency
  • Superior surface wetting
  • Non-foaming
  • Even surface coverage and higher probability of detection
  • Good corrosion protection

Specifications

  • AMS 3044
  • ASTM E709
  • ASTM E1444
  • ASME
  • MIL-STD-2132
  • MIL-STD-271
  • NAVSEA 250-1500-1
  • NAVSEA T9074-AS-GIB-010/271

Applications

Defect location: surface and slightly subsurface

Ideal for:

  • Very fine to fine discontinuities
  • Machined parts
  • Smooth surface finish
  • Critical applications
  • High volume testing
  • After secondary processing
  • Mixing with hard-water

Defect examples:

  • Inclusions
  • Seams
  • Shrink cracks
  • Tears
  • Laps
  • Flakes
  • Welding defects
  • Grinding cracks
  • Quenching cracks
  • Fatigue cracks

Use Recommendations

NDT Method: Magnetic Particle Testing, Fluorescent, Wet Method

Suspension Vehicle: Water

Required Equipment: Magnetizing device, UV light source, like the EV6000

Temperature Range: 32 to 120°F / 0 to 49°C

Container Size & Part Number

27 fl oz / 798 mL bottle (case of 6)     01-9130-41

1 gal / 3.78 L jug (case of 4)               01-9130-35

Scroll to top