Composition:
WCP-2 is composed of acetone and inorganic pigments. The aerosol propellant is carbon dioxide.

Application:
Parts should be cleaned and dried prior to testing to ensure a more uniform test surface. Shake WCP-2 to ensure uniform distribution of particles. Apply a uniform thin film of WCP-2 to the test surface. Wait one minute to allow the WCP-2 film to dry. Apply magnetic particles to the test surface. Observe indications formed around leakage fields. If base material has a high retentivity, indications will remain visible. If base material has a low retentivity, the indications will appear to slowly fade away.

Post Inspection Cleaning:
The parts must be properly demagnetized before cleaning to ensure ease of particle removal. Acetone will remove WCP-2.

• Temperature Limit: 40º to120º F
• Specification Compliance: BS 5044
• Packaging: Aerosol
• Coverage: 1 aerosol can (16 ounce by volume) covers approximately 65 square feet.
  
  
• Product Literature
• Product Data Sheet
• MSDS

Note: Aerosols CANNOT be shipped via Air Freight. Must ship via Ground only.