Magnaflux Y-7 AC/DC Electromagnetic Yoke – 230V
The Magnaflux Y-7 is a durable, high-strength AC/DC electromagnetic yoke designed for surface and sub-surface magnetic particle inspection in the most demanding field and shop environments. Solid-state controls allow the operator to switch between AC for surface indications and DC for sub-surface indications — making the Y-7 the most versatile single yoke in the Magnaflux lineup.
Featuring sealed chemical-resistant construction, articulating legs to contour to any part shape, and a robust strain-relieved 12-foot cord, the Y-7 is ideal for weld inspection and remote field testing. Each yoke carries an individual serial number for full traceability.
Note: Yoke only — for the complete kit including magnetic powders, paint marker, and carrying case, see the Magnaflux Y-7 AC/DC Yoke Kit.
Key Features
- Dual AC/DC Operation: Switch between AC (surface indications) and DC (sub-surface indications) to meet all inspection requirements with a single tool
- Sealed Chemical-Resistant Construction: Withstands harsh field environments including MPI chemicals and abrasive contaminants
- Articulating Legs: Contour to any part shape for reliable magnetic contact on complex geometries
- Strain-Relieved 12-Foot Cord: Built for rugged field use with extended reach for remote testing
- Serialized: Individual serial number on each yoke for traceability and calibration records
- Exceeds ASTM E1444 Lifting Specifications: Certified lifting force for compliant AC and DC MPI inspections
- Solid-State Controls: Reliable, durable electronics housed internally for maximum safety and longevity
When to Use AC vs. DC on the Y-7: The Y-7’s dual-mode capability is one of its most powerful features — but knowing when to switch modes is critical for reliable defect detection.
Use AC mode for detecting surface-breaking defects. AC creates a “skin effect” that concentrates the magnetic field at the part surface, making it highly sensitive to tight surface cracks, grinding cracks, and fatigue cracks. AC also provides a slight particle-agitating effect that helps particles migrate to indications.
Use DC mode when you need to detect sub-surface defects or inspect through coatings and paint. DC produces a deeper, more uniform magnetic field that penetrates further into the material — ideal for finding subsurface inclusions, laminations, or defects beneath non-conductive coatings.
Remember: DC yokes require a minimum 40 lb (18 kg) lift force per ASTM E1444, vs. 10 lb for AC. Always verify with a certified yoke test weight (PN 624115) in the appropriate mode before beginning inspection.
Applications
- Weld inspection on pipelines, pressure vessels, and structural steel
- Surface and sub-surface defect detection on castings, forgings, and machined parts
- In-service inspection of aerospace and industrial components
- Remote field inspections requiring extended cord reach
- International inspections requiring 230V power compatibility
Specifications
| Property | Specification |
|---|---|
| SKU | 625644 |
| Replaces Part Number | 43560 |
| Current Type | AC & DC (switchable) |
| Voltage | 230V |
| Cord Length | 12 ft (strain-relieved) |
| AC Lifting Force | Exceeds ASTM E1444 (10 lb / 4.5 kg minimum) |
| DC Lifting Force | Exceeds ASTM E1444 (40 lb / 18 kg minimum) |
| Construction | Sealed, chemical & abrasion resistant |
| Controls | Solid-state, internal |
| Serialized | Yes — individual serial number |
| Demagnetization | No |
| 115V Version | Magnaflux Y-7 AC/DC Yoke – 115V |
| Recommended Accessory | Certified Yoke Test Weight (PN 624115) |
| Brand | Magnaflux |